Home Improvement

Common Whirlpool Appliance Fault Codes

With a history of over 100 years, it may come as no surprise that the Whirlpool brand has become a Brit favourite. Very well known for its washing machines, the company has also created a wide range of kitchen and laundry appliances to make the lives of their customers easier. This was spurred on by post-war demand for convenient products and Whirlpool still enjoys a great reputation to this day.

However, as with most appliances, whether due to age, wear and tear or simply incorrect usage, you may sometimes encounter Whirlpool fault codes on your appliance and it’s best to first identify what this error is to ensure you know the best steps to have it fixed. If you are uncertain, you can always reach out to Whirlpool appliance engineer who can inspect the device and then proceed with changing its parts or attending to other necessary repairs

This article is for you if:

  • You own a Whirlpool washing machine, tumble dryer or dishwasher;
  • Are seeing an error code on the display or the start button is flashing in a patern;
  • Want to know if you would be able to resolve the issue on your own or give more information to the engineer beforehand.

Common Whirlpool washing machine fault codes

It may sometimes happen that your Whirlpool washing machine displays fault codes. Luckily, most of these devices have been pre-programmed with an electronic self-diagnosis system to quickly help you navigate the problem at hand and subsequently help you figure out what needs to be fixed.

From an electronic circuit board fault to a pump control fault, there are around 14 common fault codes that you might encounter and could be displayed to help you identify the issue more accurately.

You have to keep in mind that a self-diagnosis system is a tool that can point where the problem might be and it’s not a final verdict of which component is malfunctioning. While some of the issues have simple DIY fixes like the draining issues or the F03 fault where a simple cleaning of the washing machine filter is the remedy, for all electrical issues it’s always advisable to contact a Whirlpool washing machine repair specialist.

Note: Whirlpool fault codes may vary between different models. Always try to find the meaning of the fault code you encounter in the original instruction manual that came with your appliance.

  • F01 – Electronic circuit board fault
  • F02 – Motor circuit fault
  • F03 – Long drain cycle. A possible clogged filter or the wastewater pipe is blocked
  • F05 – Pump issue or wastewater pipe issue
  • F06 – Door lock fault
  • F07 – Heating circuit fault
  • F08 – Heater fault
  • F09 – Software fault
  • F11 – Pump circuit fault
  • F12 – Electronic control fault
  • F13 – Dryer temperature sensor fault (applicable to washer dryers only)
  • F15 – Heater control fault
  • F18 – Internal data error
  • F19 – Fan motor or heating fault (applicable to washer dryers only)   
You may also like:
Home Improvement
Washing machine not spinning? 7 reasons why it’s happening and fixes.

Common Whirlpool dishwasher fault codes

Having your dishwasher not function optimally might leave you wondering why is your appliance leaving your dishes dirty. In such a case, your Whirlpool dishwasher could display various fault codes. One of the first steps to identifying the fault code is to count how many times is the start button flashing before a long pause. This will help you identify the issue at hand.

For example, three short flashes mean an F03 fault which is a failure of the appliance to drain the water. In that situation, if you give a good clean to your Whirlpool dishwasher filter and restart the appliance will resolve the fault code. Although in other situations like an F11 fault code (wash pump fault) you will need to bring in a Whirlpool dishwasher repairman to further diagnose and fix your appliance due to the complexity of the issue.

  • F01 – Anti-flooding overflow
  • F02 – Water fill solenoid valve failure
  • F03 – Water drain failure
  • F04 – Thermostat fault
  • F06 – Water fill timeout
  • F07 – Water turbine damaged
  • F08 – Temperature timeout fault
  • F09 – Software issue
  • F10 – Heating element fault
  • F11 – Wash pump fault
  • F12 – Mainboard and display communication error.
  • F13 – Mainboard fault
  • F15 – Virtual sensor error

Need a professional?

Find a professional appliance engeneer

Add a valid postcode e.g. SE1 2TH
  • We’re certified:

Common Whirlpool tumble dryer fault codes

Another appliance the Whirlpool brand is famous for is their high-quality tumble dryers. But much like what has been mentioned above, you might see some Whirlpool tumble dryer fault codes, too. Do not panic, but rather see if you can identify the problem yourself first.

There could be a simple explanation for the problem such as the lint trap being full but other than that you will most likely need to turn to a professional Whirlpool tumble dryer expert to resolve the problem. Here are some of the most common Whirlpool tumble-dryer faults you might see:

  • F01 – Electronic circuit board fault
  • F02 – Motor circuit fault
  • F03 – Temperature sensing fault
  • F05 – Waste pipe blockage or pump issue
  • F06 – Door lock fault
  • F07 – Electronic circuit board fault / Heating circuit fault
  • F08 – Heater fault
  • F09 – Software fault
  • F11 – Pump circuit fault
  • F12 – Electronic control fault
  • F13 – Dryer temperature sensing fault (washer dryers only)
  • F15 – Heater control fault.
  • F18 – Internal data error.
  • F19 – Fan motor or heating fault.  (washer dryers only)
You may also like:
Cleaning Guides
How to Clean a Tumble Dryer

Get a professional to take care of your appliance

If your appliance is giving you an error code and you don’t know how to handle it or you simply don’t have the time or tools to do so then simply get in touch with Whirlpool appliance repair experts. They will come to you with all the tools needed for the job and fix it on the spot.

Just provide them with the exact model of your appliance beforehand and if possible the fault code so they can come with all the needed parts to save you time and money.

Takeaways

  • Whirlpool is a well-known and trusted brand.
  • Whether you have a washing machine, dishwasher or tumble dryer, your appliance may, at times, show you fault codes.
  • Identifying these fault codes is the first step in having the problem resolved.
  • While some errors can be rectified easily by yourself, in other cases, you may need to call in a professional service.

***

Did you find this article useful? Share your thoughts with us in the comments below.

Img Source: Shutterstock/Gorodenkoff

0 0 votes
Article Rating
Subscribe
Notify of
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x